<Operation>
The operation consists of 2 parts as follows.
Procedure 1 to 8:
Writing OPU Parameter
Procedure 9 to 13: Disc Playback Capability Check
1.
Press the " " (On/standby) key to turn on the power.
This unit
2.
Start up Rpower.exe.
The screen appears as shown below. (Fig. 6)
3.
Select the port and baud rate. (Fig. 6)
•
COM port: Select the USB port of PC connected to the USB–UART conversion adaptor.
•
Baud rate: Select "115200".
Rpower8550 5.12.61 (2010/07/15)
FL display
Fig. 5
SONY KEM470 Ver.A −−− ComPort 6 −−−
Fig. 6
FL display
P O W E R O N
BRX-610/NS-PZ20
N O D I S C
27