Cutter Parts
Before you start cutting, you should familiarize yourself with the cutter and its basic parts and functions:
Front View
Control Panel
Carriage Arm
Pinch Rollers
Feed Rollers
Positioning Button
Left Side Cover
Right Side Cover
Used to provide input directly to the cutter. Covered in detail in the
"Control Panel" (page 8) section of this manual.
Holds the Blade (or Pen) Carriage. Shown in detail on page 5.
Holds the media tightly to the feed roller below. Back view shown in detail
on page 7.
Positions the cutting material during operation.
Used by the cutter to determine the location of the Carriage Arm.
Contains the Power Cable Port, Power Switch and Fuse Cartridge for
the cutter. Shown in detail on page 6.
Contains the USB and Serial cable ports for the cutter. Shown in detail on
page 5.
- 4 -