Setup Screen - US Cutter MH-721 Manual

Setup Screen

The Setup screen allows you to adjust some of the more technical settings of the cutter. For most users, these
settings should not be changed.
Reset Button Resets the cutter by setting the Baud rate back to 9600, clearing the memory of the
machine, and setting the origin of the carriage arm to its rightmost position.
Offline/Pause Accesses Redraw mode.
Button
Setup Button Exits Setup mode and returns to the main screen.
Test Button Has no function in this mode.
Origin Button Has no function in this mode.
V+/ V- Buttons Adjusts the e Speed of the cutter.
F+/F- Buttons Adjusts the Baud rate of the cutter.
- 10 -