Electrical Connection - LG LSWS306ST Installation Manual

Part 3 ELECTRICAL CONNECTIONS
2

ELECTRICAL CONNECTION

The fourth step of the installation is to prepare the electrical connection as follows:
1. Turn off the circuit breaker or remove fuses to the oven branch circuit.
2. With the oven positioned directly in front of the cabinet opening, connect the flexible conduit to the electrical
junction box as shown below. Position the conduit in such a manner that it will lie on top of the oven in a natural
loop when the oven is installed.
IMPORTANT NOTE
• You will need to purchase an appropriate conduit connector to complete the connection of the conduit to the junction box.
To connect to a three-wire circuit, follow these steps:
1. Connect the oven ground (green+yellow) wire to the branch
circuit ground (green+yellow) wire in accordance with local
codes, using a wire nut.
2. Connect the oven blue wire to the branch circuit neutral
(blue in color) wire in accordance with local codes, using a
wire nut.
3. Connect the oven brown wire to the branch circuit brown
(L) wire in accordance with local codes, using a wire nut.
4. Install the junction box cover.
5" Min
3-wire circuit connection
- 8 -
Power code
Location
22" Min for single wall oven
42" Min for double wall oven
Blue
Neutral
Green+Yellow
Brown
Wire nut
Junction Box