Electrical Safety - LG LSWD305ST Owner's Manual

READ ALL INSTRUCTIONS BEFORE USE
SAFETY PRECAUTIONS
• Be certain all packing materials are removed
from the appliance before operating.
Keep plastics, clothes, and paper away from parts
of the appliance that may become hot.
• DO NOT force the door open.
This can damage the automatic door locking
system. Use care when opening the oven door
after the self-cleaning cycle. Stand to the side of
the oven when opening the door to allow hot air or
steam to escape. The oven may still be VERY
HOT.

ELECTRICAL SAFETY

• Protective Liners. Do not use aluminum foil or
any other material to line the oven bottoms.
Improper installation of these liners may result in
a risk of electric shock or fire.
• Do Not allow aluminum foil or meat probe to
contact heating elements.
WARNING
• DO NOT place aluminum foil directly on the
oven bottom.
4
(cont.)
• DO NOT use a steel-wool pad.
It will SCRATCH the surface.
• DO NOT use harsh etching, abrasive cleaners
or sharp metal scrapers to clean the oven
door glass since they can scratch the surface.
It may result in shattering of the glass.
• Be careful when removing and lifting the door.
• DO NOT lift the door by the handle.
The door is very heavy.
• DO NOT step or sit on oven door.
Be sure to follow proper installation instructions.
• Before replacing your oven light bulb, switch
off the electrical power to the oven at the main
fuse or circuit breaker panel.
Failure to do so can result in severe personal
injury, death, or electrical shock.
• DO NOT line the oven walls, racks, bottom, or
any other part of the oven with aluminum foil
or any other material.
Doing so will disrupt heat distribution, produce
poor baking results and cause permanent
damage to the oven interior (aluminum foil will
melt to the interior surface of the oven.)
Aluminum foil