Before Beginning; Important Safety Instructions - LG LSWS306ST Installation Manual

Electric convection built-in oven
Hide thumbs Also See for LSWS306ST:
Table of Contents

Advertisement

Available languages

Available languages

Part 1
SAFETY
1

BEFORE BEGINNING

Remove all tape and packing materials before using the oven. Dispose of all plastic bags after unpacking the oven.
Never allow children to play with packing materials. Children are at all times under supervision to ensure that they
are not playing with the product or close to it when in operation.
You can download an installation manual at www.lg.com/br.

IMPORTANT SAFETY INSTRUCTIONS

Read and follow all instructions before using the oven to prevent the risk of fire, electric shock, injury to persons,
or damage when using the oven. This guide does not cover all possible conditions that may occur. For further
assistance contact the service agent or manufacturer.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "WARNING" or "CAUTION".
These words mean :
This symbol will alert you to hazards or unsafe practices which could cause serious bodily
WARNING
harm or death.
This symbol will alert you to hazards or unsafe practices which could cause bodily injury or
CAUTION
property damage.
• The information in this manual should be followed exactly.
- Failure to do so could result in fire or electrical shock, causing property damage, personal injury
or death.
• DO NOT put any weight on the oven door. Never allow anyone to climb, sit, stand or
hang on the oven door.
- The oven could be tipped and injury might result from contact with hot food or the oven itself.
• The electrical power must be shut off while the electrical connections are being
made.
- Failure to do so can result in severe personal injury, death or electrical shock.
• Improper connection of aluminum house wiring to copper leads can result in
an electrical hazard or fire. Use only connectors designed for joining copper to
aluminum and follow the manufacturer's recommended procedure closely.
• Mounting screws must be used.
- Failure to do so can result in the oven falling out of the cabinet causing serious injury.
• Make sure the cabinets and wall coverings around the oven can withstand the
temperature (up to 194˚F[90˚C]) generated by the oven.
- Discoloration, delamination or melting may occur.
• DO NOT remove spacers on the side walls of the built-in oven.
- These spacers center the oven in the space provided.The oven must be centered to prevent
excess heat buildup that may result in heat damage or fire.
• DO NOT block the oven air exhaust located at the bottom of the oven.
- Blocking the exhaust may cause cabinet damage and product malfunction.
WARNING
CAUTION
- 2 -

Advertisement

Table of Contents
loading

Table of Contents