Basic Operations; Selecting Folders And Files; Basic Playback; Accessing Information - RCA VR5340 User Manual

Basic operations

Selecting folders and files

1. While playback is stopped, press and hold MENU/INFO to access the player menu.
2. Press / to select Folders and press
3. Press + / - to select folder and press
4. Press + / - to select files and press
• If the file you want is in the current folder, you can press
either the Stop or Play modes.
• If the file is not supported by the unit, This file cannot be supported! will be shown.

Basic playback

To play back recorded files:
1. Select a folder and a file.
2. Press to start playback.
3. Press to pause playback, press again to resume.
4. You can press + / - to adjust volume.
5. When playback is paused, press + / - to select different speeds to make quick search within a file.
Options are SLOW, NORM(Normal) and FAST. You can also select the playback speed by adjusting the
value of Play Speed in Settings menu. Refer to Settings section for details.
6. Select playback mode (Repeat One, Repeat All) by selecting the desired mode in the Settings menu.
Refer to Settings section for details.
7. Press or once to skip to the previous/next file. Press and hold
through the file.
8. Press STOP to stop playback.
• The screen will be turned off automatically after one minute of elapsed playback time. Press
any buttons to turn on the screen.
• The unit will enter Stop mode if playback is paused for more than 30 minutes.

Accessing information

While playback is stopped, press MENU/INFO to switch among different information.
14
to confirm.
to confirm.
to confirm. Press /
Remaining record time
Playback time
Record time
Record date
to skip to the previous/next folders.
/ to select it directly while in
or to fast backward/forward