Advertisement
19
1
Motor connection
to swicth
Disassemble the handle, top cover, filter and hatch back as described in previous
Section E.0.
Disconnect the motor wires from the PCBA and the switch (circles in fig.1)
Unscrew the airguide over the motor (fig.1).
Replace the motor unit.
Pay close attention to positioning the motor, gaskets and the wires correctly (see
fig.2).
Then repeat the process backwards to assemble the machine.
Change motor unit
2
WARNING: The upper section of the
machine contains live components.
Contact with live components leads
to serious or even fatal injuries.
Always disconnect the mains plug
before disassembly.
Motor connection
to PCBA
19
E.1
Advertisement
