Microwave Cooking; Timer Function - Danby DMW07A2SSDD Owner's Manual

OPERATING INSTRUCTIONS
FIRST TIME USE
When the appliance is plugged in for the fi rst time,
the display will show "ENTER CLOCK TIME". Use
the number pad to enter the current time and then
press the clock button to confi rm
When setting the cook timer, the appliance will
return to standby mode if there is no input within 25
seconds.
During operation:
• Press the Start/Stop button to pause the
functioning.
• Press the Start/Stop button again to resume
functioning.
• Press the Reset button to cancel the cooking
program.
The appliance will beep four times at the end of
a cooking program and "END" will show on the
display. The appliance will continue to beep every
2 minutes until a button is pressed or the door is
opened.
SETTING THE CLOCK
The clock can be only be set as a 12 hour clock.
To set the current time:
1. Press the Clock button.
2. Use the number pad to enter the current time.
3. Press the Clock button to confi rm.
During operation, press the Clock button to see the
current time.

TIMER FUNCTION

To set the timer function:
1. Press the Timer button.
2. Use the number pad to enter the desired time to
run the microwave.
3. Press the Start/Stop button to begin operation.

MICROWAVE COOKING

To set a cooking power and time:
1. Use the number pad to enter the desired cook
time.
2. Press the Start/Stop button to begin operation.
The program will default to 100% power level.
To set a power level other than 100%:
1. Use the number pad to enter the desired cook
time.
2. Press the Power button.
3. Use the number pad to enter the desired power
level as per the below chart.
4. Press the Start/Stop button to begin operation.
Number Pad
0
9
8
7
6
5
4
3
2
1
Two Stage Cooking
Some recipes require different stages of cooking
at different temperatures. To set a two stage cook
program:
Set stage one:
1. Use the number pad to enter the desired cook
time.
2. Use the Power button to enter the desired power
level.
Set stage two:
3. Press the Cook button.
4. Use the number pad to enter the desired cook
time.
5. Use the Power button to enter the desired power
level.
6. Press the Start/Stop button to begin operation.
7
Cooking Power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%