Cook By Weight; Defrost By Weight - Danby DMW07A2SSDD Owner's Manual

OPERATING INSTRUCTIONS

COOK BY WEIGHT

1. Press the Cook By Weight button.
2. Press number 1, 2 or 3 to indicate what type
of meat will be cooked, as per the below chart.
Meat must be defrosted and at refrigerated
temperature.
Code Type
1 Beef
2 Mutton 5 lbs. 16 oz.
3 Pork
3. Use the number pad to enter the weight of the
meat that will be cooked. Weight must be in
pounds and ounces.
4. Press the Start/Stop button to confi rm.
During operation the appliance will pause and beep
to indicate that the meat should be turned over.
Press the Start/Stop button to resume operation. Let
meat stand a few minutes before carving.

DEFROST BY WEIGHT

The defrosting time and power level are adjusted
automatically once the weight is entered.
1. Press the Defrost By Weight button.
2. Use the number pad to enter the weight of the
food that will be defrosted. Weight must be in
pounds and ounces. Maximum weight is 5 lbs.
16 oz.
3. Press the Start/Stop button to confi rm.
During operation the appliance will pause and
beep to indicate that the food should be turned over
or stirred. Press the Start/Stop button to resume
operation.
Maximum Weight
5 lbs. 16 oz.
5 lbs. 4 oz.
SPEED DEFROST
1. Press the Speed Defrost button.
2. Use the number pads to enter the desired
defrosting time.
3. Press the Start/Stop button to confi rm.
During operation the appliance will pause and
beep to indicate that the food should be turned over
or stirred. Press the Start/Stop button to resume
operation.
After setting Speed Defrost, the microwave can be
programmed to automatically switch to one or two-
stage cooking.
For Speed Defrost and one-stage cooking, follow
the steps above. Before pressing the Start/Stop
button, press the Cook button and enter the time
and power level. Press the Start/Stop button to
confi rm.
For Speed Defrost and two-stage cooking, follow
the steps above. Before pressing the Start/Stop
button, press the Cook button and enter the two-
stage cooking program. Press the Start/Stop button
to confi rm.
SETTING THE CHILD LOCK
To set the child lock, while the unit is in standby
mode, press and hold the Reset button for 3
seconds. The appliance will beep to indicate that the
child lock is activated. While locked, the appliance
cannot be used.
To cancel the child lock, press and hold the Reset
button for 3 seconds. The appliance will beep to
indicate that the child lock has been deactivated.
9