¤
Select Announcement or Advisory message.
¤
Tap on Record own.
¤
Record an announcement after the ready tone.
¤
Complete the recording with End and confirm
with OK.
The standard announcement is recorded over. You can
listen to your announcement, re-record it or delete it.
Playing back the announcement:
Cancel the announcement playback:
Press
.
Deleting the recording:
ard announcement is activated once again.
Repeating the recording:
u
The recording ends if there is a pause lasting longer than 3 seconds.
u
If you cancel the recording, the default announcement is used.
u
If the answer machine's memory is full, it will switch to Advisory message mode.
After old messages have been deleted, it switches back into Announcement
mode.
Setting recording parameters
¤
Application screen
Recordings.
You can select the following parameters:
u
Maximum length of the recording:
u
Quality of recording:
u
After a certain period of time, a call is accepted by the answer machine:
Ring delay
Automatic: 18 seconds, if no new messages are available. 10 seconds, if new messages are
available. If you remotely access your answer machine (
15 seconds that no new messages are available. If you then the end call, no call charges are
incurred.
Setting the language for standard announcements
¤
Application screen
AM phrase language
For standard announcements by the answer machine, you can set a language of your choice.
Playback recording time
¤
Application screen
Play time stamp.
If you activate the function, a recorded date and time message is played back.
Tap on Play.
Tap on Delete. The stand-
Tap on Re-record.
Answer machine
Recording quality
No delay, After 10, 18 or 30 seconds or Automatic.
Answer machine
Select the language.
Answer machine
Current announcement
Standard
Recording length 1, 2 or 3 minutes or Maximum.
Excellent or Long play.
page 54), you will know after approx.
Answer machine
Announcement
Play
Context menu
Settings
Context menu
Settings
Context menu
Settings
Record
own
51