Table of Contents
Advertisement
•
NEVER obstruct the air intake, sample exhaust or case vent ports of the instrument during use.
•
WARNING – This Identifier must not be operated in flammable atmospheres.
•
CAUTION – Should be operated by certified personnel.
•
Avoid breathing A/C refrigerant and lubricant vapor or mist. Exposure may irritate eyes, nose and
throat. To remove HFC-134a from the A/C system, use service equipment certified to meet the requirements
of SAE J2788. Additional health and safety information may be obtained from refrigerant and lubricant
manufacturers.
•
CAUTION – Do not pressure test or leak test HFC-134a service equipment and/or vehicle air
conditioning systems with compressed air. Some mixtures of air and HFC-134a have been shown to be
combustible at elevated pressures. These mixtures, if ignited, may cause injury or property damage.
Additional health and safety information may be obtained from refrigerant manufacturers.
The Mini ID utilizes a disposable oil filter that can not be cleaned.
Be sure to have spare filters available as the instrument cannot be operated with a
contaminated filter.
P/N 6-01-6001-23-1
When properly used, this filter will protect the instrument from oil and sealant
contamination.
See Page 10 for additional information.
Advertisement
Table of Contents
