Install The Front Panel. Making The Connections - OSEE DAC6820N User Manual

DAC6820N (4) User Manual
Follow the following steps to install the module:
Step 1：Locate the position for back connector and insert the back connector
Step2：Fasten the screw to fix the back connector.
Step3：Locate the slot for module.
Step 4：Get the module installed in the slot, push the module slightly along the slot, press module again
to confirm that the module is installed firmly and then close swivel handle.
 Step5：Install the front panel.
Fig. 2-1 Installation of 2U Frame of 6800 Series

Install the front panel. Making the Connections

Please connect signals based on Fig. 1-2.
-5 -