Specifications; Parts And Accessories - Simplicity 2690810 Operator's Manual

ENGINE
19.5 HP* Briggs & Stratton
Model 310000, Extended Life Series™
Horsepower 19.5 HP @ 3500 +/- 100 rpm
Displacement 30.42 cu in. (500cc)
Electrical System 12V-15A Reg.
Battery: 12 Volt, 195 CCA
Oil Capacity 46-48 oz (1,36 -1,4 L)
Spark Plug Gap 0.030 in. (0,76 mm)
Spark Plug Torque 180 in-lbs (20 Nm)
CHASSIS
Fuel Tank Capacity Capacity: 3.5 gal (13,2 L)
Front Wheels Tire Size: 15 x 6,0-6
Inflation Pressure: 12-14 psi (0,82-0,96 bar)
Rear Wheels Tire Size: 20 x 8,0-8
Inflation Pressure: 10 psi (0,68 bar)
TRANSMISSION
K46Z
Type Hydrostatic Tuff Torq K46Z
Engine Oil 10w 30 Premium Engine Oil
Speeds Forward: 0-5.5 MPH (0-9,0 km/h)
@ 3400 rpm Reverse: 0-3.0 MPH (0-4,6 km/h)
Continuous Torque 170 ft-lbs (230,5 Nm)
Output
Drawbar Rating 227 lbs (103 kg)
Maximum Weight 675 lbs (306 kg)
on Axle
Engine Power Rating Information
*The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engi-
neers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and cor-
rected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are
derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating
conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and the vari-
ety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power
when used in a given piece of power equipment (actual "on-site" or net horsepower). This difference is due to a variety of
factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), appli-
cation limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to
manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series en-
gine.

PARTS AND ACCESSORIES

Replacement Parts
We recommend that you see any authorized dealer for all
maintenance and service of the tractor/engine and parts.
MOWER
Width of Cut 38" (96,5 cm)
Number of Blades 2
Base Deck Platform Side Discharge
Cutting Height 1.0-4.0 in. (2,5-10,2 cm)
Cutting Positions Infinite
DIMENSIONS
Overall Length
Overall Width
Height
Weight:
19.5 hp Tractor
w/ 38" Mower Deck
Accessories
For a list of the available accessories, see an authorized
dealer.

SPECIFICATIONS

71" (180,3 cm)
62" (116,8 cm)
45" (114,3 cm)
502 lbs (227 kg)
23