Specifications - Simplicity 5900707 Operator's Manual

24hp zero-turn riders
Hide thumbs Also See for 5900707:
Table of Contents

Advertisement

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.
ENGINE:
24 HP Briggs & Stratton
Make
Briggs & Stratton
Model
44M7770113E1
Horsepower
24 @ 3500 rpm
Displacement
44.2 Cu. in (725 cc)
Electrical System
12 Volt, 16 amp. Alternator, Battery: 340
CCA
Oil Capacity
4 US pt. ( 1.9L) w/ Filter
CHASSIS:
Fuel Tank
Capacity: 6 Gallons (22.7 L)
Rear Wheels
Tire Size: 20 x 8.00 -10
Inflation Pressure: 15 psi (1,03 bar)
Front Wheels
Tire Size: 11 x 4.00 - 5
Inflation Pressure: 40 psi (2,76 bar)
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of
Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance
has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived
at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is
affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the
wide array of products on which engines are placed and the variety of environmental issues applicable to
operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of
power equipment (actual "on-site" or net power). This difference is due to a variety of factors including, but not
limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application
limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due
to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for
this Series engine.
TRANSMISSIONS:
HydroGear PG-3H / HGM-12C
Type
Pump and Wheel Motor
Hydraulic Fluid
SAE 20W-50 motor oil
Speeds
Forward: 0-8 MPH (0-12.87 km/h)
@ 3400 rpm
Reverse: 0-4 MPH (0-6.44 km/h)
Continuous Torque
222 ft. lbs. (301 N.m.)
Output
Maximum Weight
750 lbs. (340 Kg)
on Axle
DIMENSIONS:
Overall Length
79" (201 cm)
Overall Width
61" (155 cm)
Height
65" (165 cm)
Weight (apx..)
945 lbs. (429 kg)
Specifications
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zt4000 series

Table of Contents