Advertisement
Ordering Information
Sensors
(Refer to Dimensions on page 11.)
Sensing method
Appearance
Through-beam
(Emitter + Receiver) *4
Retro-reflective with
MSR function
*1
Distance-settable
(BGS Models)
*1. The Reflector is sold separately. Select the Reflector model most suited to the application.
*2. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*3. Pre-wired Models with a 0.5-m cable are also available for these products. When ordering, specify the cable length by adding "0.5M" to the end of the model number
(e.g., E3Z-LT61 0.5M).
M12 Pre-wired Connector Models are also available. When ordering, add "-M1J" to the end of the model number (e.g., E3Z-LT61-M1J). The cable is 0.3 m long.
Also, the following connection forms can be manufactured. Ask your OMRON representative for details.
• Pre-wired Models with 1-m or 5-m cables
• Pre-wired Connector Models with M8 4-pin connectors or M8 3-pin connectors.
*4. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver.
Orders for individual Emitters and Receivers are accepted. (Modifications are required for some models. Ask your OMRON representative for details.)
Accessories
Slits
(A Slit is not provided with a Through-beam Sensor. Order a Slit separately if required.)
Slit width
0.5 mm dia.
Reflectors
(A Reflector is required for Retro-reflective Sensors: A Reflector is not provided with the Sensor. Be sure to order a Reflector.)
(Refer to Dimensions on page 14.)
Name
Reflector
Connection
Response
method
time
Pre-wired
(2 m)*3
Connector
(M8, 4 pins)
Pre-wired
(2 m)*3
1 ms
Connector
(M8, 4 pins)
Pre-wired
(2 m)*3
Connector
(M8, 4 pins)
Pre-wired
(2 m)*3
0.5 ms
Connector
(M8, 4 pins)
Sensing distance
3 m
Sensing distance (typical)
15 m (300 mm)
7 m (200 mm)
7 m (200 mm)
Sensing distance
60 m
*2
15 m
(300 mm)
(Using E39-R1)
7 m
(200 mm)
(Using E39-R12)
7 m
(200 mm)
(Using E39-R6)
20 to 40 mm
(Min. distance set)
20 to 300 mm
(Max. distance set)
25 to 40 mm
(Min. distance set)
25 to 300 mm
(Max. distance set)
Minimum detectable object
(typical)
0.1 mm dia.
Model
E39-R1
• Retro-reflective models are not provided with Reflectors.
• Separate the Sensor and the Reflector by at least the
E39-R12
distance given in parentheses.
• The MSR function is enabled.
E39-R6
E3Z-LT/LR/LL
Model
NPN output
PNP output
E3Z-LT61 2M
E3Z-LT81 2M
Emitter E3Z-T61-L 2M
Emitter E3Z-T81-L 2M
Receiver E3Z-T61-D 2M
Receiver E3Z-T81-D 2M
E3Z-LT66
E3Z-LT86
Emitter E3Z-T66-L
Emitter E3Z-T86-L
Receiver E3Z-T66-D
Receiver E3Z-T86-D
E3Z-LR61 2M
E3Z-LR81 2M
E3Z-LR66
E3Z-LR86
E3Z-LL61 2M
E3Z-LL81 2M
E3Z-LL66
E3Z-LL86
E3Z-LL63 2M
E3Z-LL83 2M
E3Z-LL68
E3Z-LL88
(Refer to Dimensions on page 14.)
Model
Contents
One set
E39-S65A
(contains Slits for both the
Emitter and Receiver)
Remarks
Red light
2
Advertisement
