Delete A Flight Plan; Graphical Flight Plan Creation; Trip Planning - Garmin G1000 Reference Manual

SECTION 8 – FLIGHT PLANNING

8.18 DElETE A FlIGhT PlAN

1) From the Flight Plan Catalog Page, press the FMS
Knob to activate the cursor.
2) Turn the large FMS Knob to highlight the flight plan
to be deleted.
3) Press the DeLeTe Softkey.
4) A 'Delete flight plan #?' confirmation window is
displayed. With 'OK' highlighted, press the eNT
Key to delete the flight plan. To cancel, turn the
large FMS Knob to highlight 'CANCEL' and press
the eNT Key.

8.19 GRAPhICAl FlIGhT PlAN CREATION

1) Press the FPL Key on the MFD to display the Active
Flight Plan Page.
2) Press the Joystick to activate the map pointer. Use
the Joystick to move the pointer to the desired
point on the map to be inserted as a waypoint in
the flight plan.
3) Press the LD WPT Softkey. The selected waypoint is
inserted at the end of the flight plan. The default
user waypoint naming is USR000, USR001, USR002
and so on.
4) If the selected waypoint is to be placed elsewhere in
the flight plan, press the FMS Knob to activate the
cursor. Waypoints are inserted
5) After placing the cursor at the desired point in the
list of waypoints, press the LD WPT Softkey.
6) To change the user waypoint name, follow the
procedure for modifying a user waypoint.
8-8
ABOVE
the cursor.
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III

8.20 TRIP PlANNING

1) Turn the large FMS Knob to select the 'AUX' page
group.
2) Turn the small FMS Knob to select the first
rectangular page icon.
3) The current page mode is displayed at the top of the
page: 'AUTOMATIC' or 'MANUAL'. To change the
page mode, press the AUTO or MANUAL Softkey.
Starting WPT
Figure 8-21 Trip Planning Page
4) For Direct-to planning, press the WPTS Softkey and
verify that the starting waypoint field indicates
'P.POS' (present position). If necessary, press the
MeNU Key and select 'Set WPT to Present Position'
to display 'P.POS'. Press the eNT Key and the
flashing cursor moves to the ending waypoint field.
Turn the FMS Knobs to enter the identifier of the
ending waypoint and press the eNT Key to accept
the waypoint.
Or:
Ending WPT
190-00384-09 Rev. A