Recording To A Specified Track; Clearing A User Song - Yamaha PSR-E363 Owner's Manual

Recording Your Performance

Recording to a Specified Track

1
Make the desired settings, such as those
of Voice or Style.
If you want to record the melody performance,
turn ACMP off (page 22). If you want to record
Style playback, turn ACMP on (page 22).
2
While holding down the [REC] button,
press the desired Track button 1 or 2 to
engage the Record mode.
If you want to record Style playback, make sure to
select the Track 2. If you want to record melody
performance, select either Track 1 or Track 2 as
desired. The illustration below is the example
when selecting Track 2.
The User Song appears on the display.
User 1
EC
001
If Track 2 is selected as Recording target for
example and Track 1 contains already recorded
data, L flashes and R lights in the display. Turning
on or off R via the [TRACK 1] button will deter-
mine whether you listen to a previously recorded
Track or not while recording a new Track.
3
Press the [+], [-] buttons to select the
User Song you want to record.
4
Same as in Steps 3 to 5 (page 41) in
"Quick Recording."
42
PSR-E363, PSR-EW300, YPT-360 Owner's Manual
User Song

Clearing a User Song

1
Press the [SONG] button then select the
desired User Song by using the Number
buttons.
2
Press and hold the [REC] button for lon-
ger than a second.
A confirmation message appears.
YES
Hold for longer
than a second.
To cancel the operation, press the [-/NO] button.
3
Press the [+/YES] button.
A confirmation message appears again.
Sure?
YES
To cancel the operation, press the [-/NO] button.
4
Press the [+/YES] button to clear the
Song.
A "Writing!" message appears while the track is
being cleared.
ClrUser1