The Functions - Yamaha PSR-E363 Owner's Manual

The Functions

The Functions settings provide access to a range of detailed instrument parameters
such as Tuning, Split Point, Voices and Effects.
1
Press the [FUNCTION] button several
times until the desired item appears.
Each time the [FUNCTION] button is pressed, the
Function number increases one by one. To
decrease the Function number by one, simulta-
neously hold down the [FUNCTION] button and
press the [-] button briefly. Simply pressing only
the [+] or [-] button does not change the Function
number.
Current value
Transpos
00
005
Function number
After a few seconds, the Function name may be
replaced with the setting value depending on the
selected Function.
NOTE
• The Function number does not appear in the display dur-
ing Song, Style or metronome playback. The beat value
appears instead.
Function List
Function
Function name
Number
Volume
001 Style Volume StyleVol
SongVol
002 Song Volume
[AUX IN] Audio
AuxInVol
003
Volume
[USB TO HOST]
004 USBINVol
Audio Volume
Overall
005 Transpose Transpos
006 Tuning Tuning
SplitPnt
007 Split Point
008 Touch Response TouchRes
Press several
times as
necessary
Function name
Display Range/Settings
000–127
000–127
000–127
000–127
-12–12
427.0Hz–453.0Hz
036–096 (C1–C6;
PSR-E363, YPT-360)/
028–103 (E0–G6;
PSR-EW300)
1 (Soft),
2 (Medium),
3 (Hard),
4 (Fixed)
2
Set the value by using the number but-
tons [0]–[9], [+], [-].
• Decrement
value by 1.
• No
Press simultaneously
• Off
to recall the default
setting.
NOTE
• To exit the Function settings, press one of these buttons;
[SONG], [VOICE] or [STYLE].
Default
Value
Determines the volume of the Style while a Style is selected.
100
(page 22)
Determines the volume of the Song while a Song is selected.
100
(page 27)
Adjusts the volume of audio playback, input from the [AUX IN]
50
jack (page 30).
Adjusts the volume of audio playback, input from the [USB TO
100
HOST] terminal (page 48).
0 Determines the pitch of the instrument in semitone increments.
Determines the fine tuning of the pitch of the entire instrument in
440.0Hz
approx. 0.2Hz increments.
Determines the highest key for the Split Voice and sets the Split
"point"—in other words, the key that separates the Split (lower)
54 (F#2)
and Main (upper) Voices. The Split Point setting and Accompani-
ment Split Point setting are automatically set to the same value.
2 (Medium) Refer to the page 18.
PSR-E363, PSR-EW300, YPT-360 Owner's Manual
Direct
numeric entry.
• Increment
value by 1.
• Yes
• On
Descriptions
45