Sdi Out Screen - AJA Io 4K Plus Installation And Operation Manual

SDI Out Screen

The SDI Out screen shows the current settings for the SDI outputs. The outputs
can be configured independently. If an input/output has no video, it will be
indicated on the block diagram ("No Video").
SDI Output
The number of SDI outputs will depend on the Video Input source format and the
4K Transport settings.
Select
Configure the SDI Outputs from:
• Primary YUV - The SDI output is set to the same format as the frame buffer
with YUV color.
• RGB SMPTE - Sets the output to RGB SMPTE range video for the SDI output.
• RGB Full - Sets the output to RGB full range video for the SDI output.
• Video+Key - The SDI 1 Output video is set to the same format as the
framebuffer. SDI 2 Output is set to a video key signal associated with SDI 1
(the shape to be cut out from the video - this will appear as a black and white
image/matte). Using the second output as an Alpha Channel key, with the
video output, may be useful for feeding production switchers, DVEs or other
professional video equipment.
• Stereo - Indicates SDI 1 represents the left eye output and SDI 2 represents
the right eye output of stereoscopic material, or a single link output of
multiplexed Stereo 3D.
Io 4K Plus Capture, Display, Convert v14.0r2 26 www.aja.com