Sdi Out Screen - AJA ioExpress Installation And Operation Manual

Hide thumbs Also See for ioExpress:

Table of Contents

Io Express Installation and Operation Guide — Using the AJA Control Panel

SDI Out Screen

The SDI Out screen shows the current setting for both the SDI and HDMI outputs. If an input/

output has no video, it will be indicated on the block diagram ("No Video").

Io Express Control Panel, Digital Out Screen

SDI Out Screen Settings

Information that can appear includes the following items. You can view the current setting or

click on another to change to it:

Primary—when selected, this indicates that the SDI output is set to the same format as the

framebuffer. That value will be listed in blue.

Secondary—when selected, this indicates that the SDI output is set to a format different from

the framebuffer (Primary Format). That secondary format value will be listed in green. This

shows that active processing of the video is taking place (format change and possibly down-

conversion).

Note: Control-clicking on an output icon brings up a contextual menu allowing you see the

current format and make changes if desired.

Table of Contents