Sony VAIO VGN-TZ100 Series User Manual page 93

To attach your computer to the docking station
!
Use the AC adapter supplied with your computer.
To prevent loss of unsaved data, be sure to turn off your computer before attaching it to the docking station.
Do not move your computer while attached to the docking station; this may detach the docking station and cause damage to both units.
1 Disconnect all peripherals from the computer.
2 Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet.
3 Plug the cable attached to the AC adapter (2) into the DC IN port (3) on the docking station (4).
IRX-3960_BGN
IRX-3960_END
4 Slide open the docking station connector cover on the bottom of the computer.
IRX-3960_BGN
n 93 N
Using Peripheral Devices