Audio/Video - Sony VAIO VGN-TZ100 Series User Manual

3 Push the eject button to remove the disk, and disconnect the USB floppy disk drive from your computer.
4 Reconnect the floppy disk drive by inserting the USB connector (with the USB icon facing upward) into the USB port.
5 Restart the computer by clicking Start, the arrow next to the Lock button, and Restart.
What should I do if I cannot write data to a floppy disk?
Make sure the floppy disk is properly inserted in the drive.
If the disk is inserted properly and you are still unable to write data to it, the disk may be full or write-protected. You can
either use a floppy disk that is not write-protected or disable the write-protect feature.
IRX-3960_BGN
If you select the option to restrict USB ports to read-only access with the Peripheral Device & Storage Media
Restriction Setting Utility, you cannot write data to a floppy disk connected to your computer using the USB port. To
change the settings, see Protecting Data from Unauthorized Use
IRX-3960_END

Audio/Video

What should I do if I cannot use my DV camcorder?
If it is prompted that the i.LINK device seems to be disconnected or turned off, the i.LINK cable may not be securely plugged
into the port on your computer or camcorder. Unplug the cable, and plug it in once again. See Connecting an i.LINK Device
(page 113) for more information.
(page 177).
n 240 N
Troubleshooting