Advertisement
2. Alignment and Adjustments
2-1 Service Mode
2-1-1 SERVICE MODE Entry Method (General Transmitter)
¢ Using the Customer Remote
1. Turn the power off and set to stand-by mode.
2. Press the remote buttons in this order; POWER OFF-INFO-MENU-MUTE-POWER ON to turn the set on.
3. The set turns on and enters service mode.
¢ Using the Factory Remote
1. Turn the power on.
2. Press the remote buttons in this order : Display-Factory.
3. The set enters service mode.
* If you fail to enter service mode, repeat steps 1 and 2 above.
2-1-2 Initial SERVICE MODE DISPLAY State
2-1-2(A) OSD DISPLAY
Factory Mode
01. Picture Improvement
02. Initial Setting
03. PIP/TTX/Test Pattern
04. Option-1
05. Option-2
06. Reset
Release : 2004-03-02-14:30
Version : T_NELPEU-1003
2-1-2(B) Button Operations in SERVICE MODE
Menu
UP/DOWN
LEFT/RIGHT
(ENTER)
TV/VIDEO Button
* While in Tuner mode, the direct access buttons can be used to select and change channels.
Samsung Electronics
Current Input Mode
√
√
√
√
√
√
Displays all menus
Cursor moves to select items
To increase and decrease the data of the selected items
Confirm your choice(Store OR Enter)
Change input source
Indicates selected input mode
Picture Adjustment
Setting the Initial Values
Setting the Special Features
Options-1 : Particulars Product Options
Options-2 : PDP Properties Options
Initializing after saving the adjustments
Software Version Information
Alignment and Adjustments
2-1
Advertisement
