Advertisement
2. Alignment and Adjustments
2-1 Service Mode
2-1-1 SERVICE MODE Entry Method (General Transmitter)
I For the General Transmitter
1. Turn the power off and set to stand-by mode.
2. Press the buttons of the transmitter in this order; Info-Menu-Mute-Power to turn the set on.
3. The set turns on and enters service mode.
* If you fail to enter service mode, repeat steps 1 and 2 above.
2-1-2 Initial DISPLAY State of SERVICE MODE
2-1-2(A) OSD DISPLAY
SERVICE MAIN
1. VSP9437-1
2. VSP9437-2
3. FLI2300
4. ASI500-1
5. ASI500-2
6. DNIe
7. AD9888
8. CXA2151
Release : 2003-05-02 M_NNWS42M6_100
2-1-2(B) B
utton Operations in
Menu
UP/DOWN Key
LEFT/RIGHT Key
Samsung Electronics
9. CXA2101
10. LOSIC
11. TP LOG-ASI
12. Option
13. CheckSum 0000
14. Reset
SERVICE MODE
Displays all menus
Cursor move to select items
Enable to increase and decrease the data of the selected items
Alignment and Adjustments
2-1
Advertisement
