SAGEMCOM F@st 5260 User Manual page 23

Sagemcom F@st 5260
Change the Wi-Fi Channel
You may want to change your Wi-Fi network channel to avoid other Wi-Fi networks or
interfering devices such as microwaves. If you select "Auto" the router will select the best
available channel for your wireless network.
1. Log in to the web GUI.
2. Click on the network where you want to change the Wi-Fi channel.
3. Select the Basic tab. In the Basic section, open the pull-down menu and select the channel
you want to use.
4. At the bottom right side of the window, click Apply.
Change the Wireless Network Security Encryption and Password
Your wireless (Wi-Fi) network name (SSID) and password provide Internet access to your
network. The wireless password allows you to log in to your network. Provide the network
name and network password to users whom you wish to grant access to your wireless
Internet connection.
1. Log in to the web GUI.
2. Click on the network where you want to change the password.
3. Select the Basic tab. In the Security section, select the security encryption mode. The
default is WPA2 Personal. It is highly recommended that you retain the default
setting unless you have devices that do not support WPA2.
4. Enter the new network password in the Password field, then click Apply.
Chapter 2:
Getting Started
19