Timer Mode - Grundig TR 2200 DAB Plus Manual

TIMER­MODE
Setting­the­alarm­times­and­
mode
Note:­
You can select the »Alarm Setup« menu
7
also by pressing and holding
down »Mode/Alarm« in stand by mode.
1 Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 akt«.
2 Open the menu with »MENU«.
3
Select the option »System«
­Tuning­
with » « and confirm by
r e
pressing »Select/i«.
4 Select the option »Alarm«
with » ­Tuning­ « and confirm by
r e
pressing »Select/i«.
– Display: »Alarm Setup« flash.
5
Press »Select/i« drücken.
– Display: »Alarm Wizard« and »Alarm
Off«.
6
Activate the alarm stand-by
­Tuning­
with » « (»Alarm On«) and
r e
confirm by pressing »Select/i«.
– Display: »On time«, the hours flash.
7 Set the hours with »
by pressing »Select/i«.
8
Set the minutes with »
firm by pressing »Select/i«.
9 Select the desired alarm mode (Daily, Once,
Weekends or Weekdays) with »
Note:
If the alarm is set to „Once", select the date
7
(day, month and year) with »
and confirm by pressing »Select/i«.
10­
Select alarm (»Buzzer« = signal tone,
»DAB« = DAB station or »FM« = FM station)
­Tuning­
with »
r e
pressing »Select/i«.
24­ ­ ENGLISH
­--------------------------------------------------------------------------------------------------------------------------
­Tuning­ « and confirm
r e
­Tuning­
« and con-
r e
­Tuning­
r
­Tuning­
r
« and confirm by
Note:­
If the alarm is set to »DAB« or »FM«, then
7
select the desired station (only if stations
are stored on presets 1 to 10) by
­Tuning­
using »
r
»Last listened« (the last listened sta-
tion) and press »Select/i« to confirm.
11­ Select the alarm volume with »
and confirm by pressing »Select/i«.
– Display: »Alarm saved«.
12­­
P ress »Menu« to end the setting.
– Display: »
Interrupting­the­alarm
1 Press any button – except »ON/OFF« – while
the alarm is sounding.
– Display: »e« or »
– The alarm (signal tone or radio) stops.
Note:
The alarm will sound again depending on
7
how often a button has been pressed (1 time
= after 5 minutes, 2 times = 10 minutes, 3
times = 15 minutes, 4 times = 30 minutes.
The total alarm time in 90 minutes.
Cancelling­alarm­stand-by
1
Press »ON/OFF« while the alarm is sounding.
– Display: the current time and »e« or »
– The alarm (signal tone or radio) stops, but
the alarm function remains activated for the
next day at the same time.
Activating­and­deactivating­the­
«.
e
alarm
1
Press »ON/OFF« to switch off the device.
«
e
2
Press »»Mode/Alarm«« to deactivate the
alarm stand-by.
– Display: »Alarm off« and »e« or »
disappears.
– The set alarm time is saved
3
Press »Mode« to reactivate the alarm stand-
by.
– Display: »Alarm on« and »e« or »
« or select the option
e
­Tuning­
r
« or »§«.
e
§
« flash.
«
e
§
«.
§
«
§
«.