Operation; General Functions; Dab Mode - Grundig TR 2200 DAB Plus Manual

OPERATION

General­functions
Switching­on­and­off
1 Press »ON/OFF« to switch the device on and
off.
Adjusting­the­volume
1 Adjust the volume using »–­­+«.
Adjusting­the­tone
1
Open the menu with »Menu«.
2 Select the option »S y stem«
with » ­Tuning­ « and confirm by
r e
pressing »Select/i«.
3
Select the option »E q ualiser«
­Tuning­
with » « and confirm by pressing
r e
»Select/i«.
– Display e.g.: »Loudness«.
4
Select the desired option with »
and confirm by pressing »Select/i«.
5 Press »Menu« to end the display.
Listening­with­headphones
1
Connect the headphones to the »PHONE«
headphone jack (ø 3.5 mm).
– This switches off the loudspeakers.
Caution:
Excessive sound pressure from the earphones
7
or headphones can cause hearing loss.
DAB­mode
For the best DAB reception, it is sufficient to extend
the telescopic antenna and direct it accordingly.
Selecting­the­input­source­DAB
1 Select the input source DAB
with »Mode/Alarm«.
– Display: »DAB Mode«, then the name of a
DAB radio station.
22­ ­ ENGLISH
------------------------------------------------------------------------------------------------------------------------------
­Tuning­
«
r e
Selecting­stored­stations
1 Select the station you want using the preset but-
tons »1« to »5« (presets 1 to 5) or using »+­5«
and the preset buttons »1« to »5« (presets 6 to
10);
or
select the desired station step by step by
­Tuning­
pressing »
r
pressing »Select/i«.
Displaying­DAB­station­information
1 To display information on the current DAB sta-
tion, press »Select/i« repeatedly.
– The following display appears in succession:
Information from the provider (e.g. the title
of the song, the e-mail address), the signal
strength, the genre, the Ensemble (e.g. BR for
Bayern), the current frequency, reference to
signal interference (at optimum signal display
»Si g nal error: 0«) the bit rate, the
broadcasting format, the current time and
date.
Setting­Dynamic­Range­Control­
(DRC)­for­DAB­stations
When you activate Dynamic Range Control, you
can hear lower sounds better in a loud environ-
ment.
1
Open the menu with »Menu«.
2
Select the option »DRC« with »
and confirm by pressing »Select/i«.
– Display: »DRC off«.
3 Select the option »DRC
low« with » ­ Tuning­
r
pressing »Select/i«.
4
Press »Menu« to end the display.
Note:­
The DAB station must support DRC.
7
« and confirm by
e
­ Tuning­
r
hi g h« or »DRC
« and confirm by
e
«
e