Sleep Timer; Special Functions; Set­the­display­contrast - Grundig TR 2200 DAB Plus Manual

TIMER­MODE
Sleep­Timer
The device has a sleep timer which switches
off in radio mode at a preset time. It is possible
to adjust the sleep time between 90 and 10
minutes in 10 minute increments.
Select­the­switch-off­time­for­the­
sleep­timer
1 Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 akt«.
2
Open the menu with »Sleep«.
– Display: »Set sleep time«
and »Sleep off«, »
SPECIAL­FUNCTIONS
Set­the­display­illumination­–­for­
the­stand-by­mode
You can choose whether the display is always
displayed in the stand-by mode or whether it
disappears after 10 seconds.
1 Open the menu with »Menu«.
2
Select the option »S y stem«
­Tuning­
with » « and confirm by
r e
pressing »Select/i«.
3
Select the option »Backli g ht«
­Tuning­
with » « and confirm by
r e
pressing »Select/i«.
4 Select the desired option (»10 sec«
or »On«) with » ­Tuning­
r
by pressing »Select/i«.
5
Press »Menu« to end the setting.
Note:
The display is illuminated after pressing any
7
button.
­--------------------------------------------------------------------------------------------------------------------------
≤
« flash.
­--------------------------------------------------------------------------------------------
« and confirm
e
3
Set the switch-off time with »
(in 10 minutes increments) and confirm by
pressing »Select/i«.
≤
– Display: » «.
Notes:
To check the remaining switch-off time press
7
briefly »Sleep«.
You can set the switch-off time also by press-
7
ing »Sleep« (in 10 minutes increments).
Switch­off­the­sleep­timer
1
To switch off the sleep timer earlier, select in
the option »Set sleep time« the
option »Sleep off« by
­Tuning­
pressing »
r
ing »Select/i«
≤
– Display: » « disappears.
Set­the­display­contrast­
This can be optimized by the contrast depending
on the angle of display.
1
Open the menu with »Menu«.
2 Select the option »S y stem« with »
« and confirm by pressing »Select/i«.
e
3
Select the option »LCD contrast«
­Tuning­
with » « and confirm by
r e
pressing »Select/i«.
4 Select the contrast with »
confirm by pressing »Select/i«.
5
Press »Menu« to end the setting.
­Tuning­
«
r e
« and confirm by press-
e
­Tuning­
r
­Tuning­ « and
r e
ENGLISH
25­ ­