Automatic Shutdown; Timer Mode - Grundig WTR 3200 BT DAB+ WEB Manual

BLUETOOTH­MODE
Reconnecting­the­Bluetooth­device
1 If you move out of range or turn off the Blue-
tooth feature on your device, the unit will dis-
connect from your device.
2
To reconnect, simply access the Bluetooth
Manager on your Bluetooth device and select
the Grundig WTR3200.
Note:­
In case of the registered WTR 3200 BT
7
DAB+ WEB cannot connect to the Bluetooth
device again, please remove the Grundig
WTR3200 from the Bluetooth device list,
search and connect again.
TIMER­MODE
Setting­the­alarm­times­and­mode
1 8
Press » « to switch on the device.
2 Open the menu with »Menu«.
3
Select the option »System
­
with » « and confirm by pressing »OK«.
r e
4 Select the option »Alarm« with »
confirm by pressing »OK«.
– Display: »Alarm 1 and Alarm 2«
flash.
5 Select the option »Alarm1 « with left and
right button and confirm by pressing »OK«.
– Display: »Alarm1 «.
6
Enable alarm mode with »
firm by pressing »OK«.
7 Set time with left and right symbol and confirm
by pressing »OK«.
8
Set the hours with »
ing »OK«.
9
Set the minutes with »
pressing »OK«.
­---------------------------------------------------------------------------------------------------
­--------------------------------------------------------------------------------------------------------------------------
settings«
­ « and
r e
« or » «and con-
r e
­
« and confirm by press-
r e
­
« and confirm by
r e
Automatic­shutdown
If Bluetooth is selected as input source and no
Bluetooth device is connected, the WTR 3200 BT
DAB+ WEB switches automatically to Stand-by
mode after 15 minutes.
10­
Select the desired alarm mode (Daily, Once,
Weekends or Weekdays) with »
Note:
If the alarm is set to „Once", select the date
7
(day, month and year) with »
firm by pressing »OK«.
11­ Select alarm (»Buzzer« = signal tone,
Internet radio = Internet radio, Spotify =
Spotify radio, DAB = DAB radio or »FM«
= FM station) with »
pressing »OK«.
Note:­
If the alarm is set to »Internet radio,
7
Spotify, DAB« or »FM«, then select the
desired station (only if stations are stored on
presets 1 to 10) by using »
the option »Last listened« (the last
listened station) and press »OK« to confirm.
11­
Select the alarm volume with »
firm by pressing »OK«.
12­­ P ress »Menu« to end the setting.
– Display: Save changes? Select "Yes" with
» « /» « and confirm by pressing »OK«.
r e
­
«.
r e
­
« and con-
r e
­ « and confirm by
r e
­ « or select
r e
­
« and con-
r e
ENGLISH
23­ ­