Clearance To Combustibles - Napoleon Auburn NPS40 Installation And Operating Instruction

Free standing pellet heater
Table of Contents

Advertisement

Through the Wall Installations
Figure 1
Through the Wall Vents
Figure 3
NOTE: If interior vertical pellet vent is used, the clearance to the back wall is determined by the upward-turn-
ing elbow or "Tee". It will vary in depth depending on the brand of pellet vent used (it is approximately 5").
Before placing the heater, connect the elbow or "Tee" and allow for the minimum 3" clearance to the combus-
tible wall.
CLEARANCES TO COMBUSTIBLES
STRAIGHT INSTALLATION
CORNER INSTALLATION
Interior Vertical Vents
Figure 2
Interior Vertical Vents
Figure 4
9
W415-0587

Advertisement

Table of Contents
loading

Table of Contents