Advertisement
2.
Charge your D200 card reader
Charge the D200 card reader by connecting the provided USB cable with a
USB source (e.g. your computer).
The D200 card reader displays the Battery Power status as a number of bars.
There are number of factors that can affect the rate of battery drainage, for
example:
The length of time off the charger
The time before sleep mode is activated
The time between transactions
Please check the battery status prior to initiating any action on the terminal.
Should it indicate 'very low' (no bars) or 'no power' you should recharge the
battery.
Do not use any other external cables other than the specified and/or supplied
ones. Ensure that the cable is properly routed to prevent damage or
accidental contact. This device is intended for use when supplied with power
from a low voltage external power supply.
8
Advertisement
