Advertisement
STEP 2
D200 Card Reader will display "No link with Application", press the top-left
button. In the opened Menu select BLUETOOTH and press the ENTER button
[O]
STEP 3
Select PAIR and press the ENTER button [O]. Check your smartphone or
tablet, the wait until the pairing request appears both on the
smartphone/tablet and on the D200 card reader screen. Check that the
pairing code on your smartphone/tablet screen matches the pairing code on
the D200 card reader screen. If the smartphone/tablet fails to find the
terminal, please repeat the searching step, sometimes restarting the
terminal and the smartphone/tablet can solve this issue.
STEP 4
Press YES on both devices to confirm the connection on both devices
STEP 5
Now open the Smart Terminal app, login and wait for 10−20 seconds until all
three connection indicators are green and the D200 Card Reader shows
"READY" on the screen. If the connection fails, please close the application
completely, after 10−15 seconds open the application and log in again.
Now you are all set and can start accepting card payments.
11
Advertisement
