Advertisement
Please keep your D200 Card Reader general safely instructions:
Use only the provided AC adapter. There might be a risk of explosion and
fire or other device damage if other adapters are used.
Never expose your D200 Card Reader to extreme temperatures. There
is a risk of explosion and fire. Switch off the D200 Card Reader
immediately if it starts to emit smoke, unusual odors or noises and
contact First Data technical support.
You shall not attempt to repair the D200 Card Reader. The D200 Card
Reader may be repaired only by First Data service specialists.
Do not allow foreign matter to fall into the D200 Card Reader.
Penetration of foreign objects may lead to fire or shock.
Only operate your D200 Card Reader with the accessories supplied. The
use of other accessories may lead to malfunction.
Do not expose the D200 Card Reader to extreme weather conditions
such as rain, hail, strong sunlight or snow.
Do not insert any objects that do not meet the specified purpose into the
openings on the casing or the card slots of the D200 Card Reader. This
will cause damage to the card reader.
Keep D200 Card Reader out of reach of children to prevent swallowing
of any parts by children, causing injury to children or others, or damage
to the objects themselves.
The D200 Card Reader does not contain any serviceable parts. By
opening the D200 Card Reader you render the warranty null and void.
Do not drop, knock or shake the device. Rough handling will render D200
Card Reader inoperable and will render the warranty null and void.
Safety information for the battery pack
Only use the provided battery pack. Do not expose the battery pack to
temperatures below -20°C or above 70°C. Never short-circuit the
battery terminals – there is a risk of explosion!
Only use the provided charger. Do not apply pressure to the battery. Do
not disassemble, puncture or damage the battery.
38
Advertisement
