HP ProDesk 400 G2.5 Maintenance And Service Manual page 45

QuickSpecs
Technical Specifications – Input/Output Devices
Environmental
SmartCard Function
Acoustics
Operating temperature
Non-operating temperature
Operating humidity
Non-operating humidity
Operating shock
Non-operating shock
Operating vibration
Non-operating vibration
Drop (out of box)
Drop (in box)
Support
Interface
Chipset
Standard APIs supported
Power
Power consumption
Communication
Landing mechanism
c04716038 — 15312 — Worldwide — Version 2— June 17, 2015
HP ProDesk 400 G2.5 Business
Small Form Factor Desktop
50-dBA maximum sound pressure level
32° to 104° F (0° to 40° C)
50° to 122° F (10° to 50° C)
15% to 90% (non-condensing at ambient)
60% (non-condensing at ambient)
N/A
65 inch 2.9 ms, six surface; 30g 266 inch/second; 50g
266 inch/second six surface
2-g peak acceleration
Starting at 10 Hz, vary the frequency of vibration from
10 to 500 Hz and back to 10 Hz at a Logarithmic sweep
rate of 0.5 octave per minute.
26 in (66 cm) on carpet, six-drop sequence
29.93 in (76 cm) on concrete, 16-drop sequence
All ISO 7816 smart cards (FIPS 201)
Reads from and writes to all ISO7816-1, 2, 3, 4 memory
and microprocessor smart cards (T=0, T=1)
Identiv Cloud2190
PC/SC, EMV2000, SET
USB Port
Short circuit detection (protects smart card and reader)
Power supply compliant with ISO7816 and EMV (5V, 60
mA)
Supports 3-V and 5-V cards
100-mA maximum draw
From card
From computer
Contact device
9600 bps to 330,000 bps
12 Mbps (USB transfer speed)
Friction contact
Page 45