HP ProDesk 400 G2.5 Maintenance And Service Manual page 23

QuickSpecs
Technical Specifications – Hard Disk and Solid State Storage
Width
Length
Weight
Bandwidth Performance
Power
Mean Time Between Failure (MTBF)
Environmental
(all conditions, non-condensing)
128GB SATA 2.5" 3D Non-SED Solid State Drive
Unformatted Capacity
Architecture
Interface
Form Factor
Height
Width
Length
Weight
69.85 mm ± 0.25
100.20 mm ± 0.25
Up to 54 g
Sustained Sequential
Read:
Sustained Sequential
Write:
Power consumption:
1,500,000 hours
Operating Temperature:
Relative Humidity:
Shock:
128 GB
250,069,680 (User Addressable Sectors)
Self-Encrypting (SED) Solid State Drive with NAND Flash and SATA interface.
Fully complies with ATA/ATAPI-7 Standard (Partially Complies with ATA/ATAPI-8)
Power Saving Modes: DIPM (Partial / Slumber mode)
Support NCQ : Up to 32 depth
Synchronous Signal Recovery
Serial ATA (6.0 Gb/s)
2.5 inch
6.80 mm ± 0.20
69.85 mm ± 0.25
100.20 mm ± 0.25
Up to 54 g
c04716038 — 15312 — Worldwide — Version 2— June 17, 2015
HP ProDesk 400 G2.5 Business
Small Form Factor Desktop
Up to 540 MB/s
Up to 280 MB/s
Active: Typical 250mW; Idle: Typical 50mW
32° to 158° F (0° to 70° C)
5% to 95%
1,500 G/0.5 ms
Page 23