Advertisement
Maximum Working Voltage
Maximum working voltage refers to the signal voltage plus the common-mode voltage.
Channel-to-earth ............................................... 0 V to 3.3 V, Measurement Category I
Channel-to-channel........................................... 0 V to 3.3 V, Measurement Category I
Caution
II, III, or IV.
Environmental
This device is intended for indoor use only.
Operating environment ..................................... 0 °C to 55 °C,
Relative humidity range.................................... 10% to 90%, noncondensing,
Altitude ............................................................. 2,000 m at 25 °C ambient temperature
Pollution Degree ............................................... 2
Storage environment
Ambient temperature range ...................... –20 °C to 70 °C,
Relative humidity range............................ 5% to 95%, noncondensing,
Note
Clean the device with a soft, non-metallic brush. Make sure that the device is
completely dry and free from contaminants before returning it to service.
Shock and Vibration
Operational shock ............................................. 30 g peak, half-sine, 11 ms pulse,
Random vibration
Operating .................................................. 5 Hz to 500 Hz, 0.3 g
Nonoperating ............................................ 5 Hz to 500 Hz, 2.4 g
1
Voltage ranges are dependent on the I/O standards available for your application. For more information on
available I/O standards, refer to Xilinx documentation, available at
© National Instruments Corporation
Do not use this device for connecting to signals in Measurement Categories
1
tested in accordance with IEC-60068-2-1 and
IEC-60068-2-2.
tested in accordance with IEC-60068-2-56.
tested in accordance with IEC-60068-2-1 and
IEC-60068-2-2.
tested in accordance with IEC-60068-2-56.
tested in accordance with IEC-60068-2-27.
Test profile developed in accordance with
MIL-PRF-28800F.
tested in accordance with IEC-60068-2-64.
Nonoperating test profile exceeds the
requirements of MIL-PRF-28800F, Class 3.
www.xilinx.com
13
NI FlexRIO FPGA Module Installation Guide
rms
,
rms
.
Advertisement
