Onkyo TX-NR686 Instruction Manual page 28

„ 5.1.2 Channel System + ZONE SPEAKER
MAIN ROOM
8 7
3
2 1
6
5 4
ZONE 2
bk 9
MAIN ROOM: This is a combination of the 5.1 Channel System and front high speakers. A front high speaker is a type of
height speaker. You can select only one set of height speakers from the following three types for connection.
❏ Front High Speakers/Rear High Speakers Installation Example (
❏ Ceiling Speakers Installation Example (
❏ Dolby Enabled Speakers (Dolby Speakers) Installation Example (
ZONE 2: You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where
this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms. To output audio from an externally connected AV component to ZONE 2, use
either a digital coaxial cable, digital optical cable or analog audio cable for connection. (
• While ZONE 2 playback is being performed, height speakers installed in the main room cannot play audio.
Contents
p17)
p18)
p19)
Connections
≫
p37)
28
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p117)
Speaker Setup
Speaker Channels 5.1.2 ch < >
Subwoofer Yes
Height Speaker Front High
Zone Speaker Zone 2
Bi-Amp No
Select how many speakers you have.
• Speaker Channels: 5.1.2 ch
• Subwoofer: Yes
• Height Speaker: Select the type of
height speaker actually installed.
• Zone Speaker: Zone 2
• Bi-Amp: No
≫
Next