medemagroup M1 HD User Manual page 45

Medema A/S
User guide P9-0133-B
then be moved as far back as the edge of the rail and about 15
cm forward. Do the screws up after making the adjustment. The
screws must be at least 2 cm from the end of the C-rail.
Adjusting the angle of the
backrest
The angle of the backrest can be
adjusted by about 30°. This can
be done by undoing the adjusting
screw and changing the position of
the spacer. Do the screw up again
after making the adjustment.
Optional extra
gas cylinder for adjusting the
angle of the backrest.
Armrest forward / back
The armrest can be moved
forward / back on the C-rail.
This can be done by undoing
the screws indicated. Do the
screws up again after making
the adjustment.
Backrest forward / back
The depth of the seat can be
adjusted. This can be done by
moving the backrest forward
and back while the seat
cushion is held in position.
Undo the screws indicated on
both sides. The backrest can
45 of 62 Version 2.0.5 - 2015