TERK Technologies RMTHINTV1A Owner's Manual page 6

Setting Up the RMTHINTV1A
(continued)
Test the Location
Broadcast signal strength can vary significantly
inside your home even within the same room. In most
homes, the best signal strength will usually be in a
window or as high on the wall as possible.
Before you mount the antenna to the wall using
the provided mounting tape, it's a good idea to test
the location you want to use. Temporarily mount
the antenna using 2-3 pieces of scotch tape. Then
continue with the connection instructions below. Once
you've scanned for channels on your TV, you'll be able
to tell if this is a good location to use or not. If it is,
you can continue with the mounting instructions that
follow. If it isn't, you can try for better channel scan
results with the antenna in a different location in the
room.
5