Advertisement
Quick Links
Advertisement
Related Manuals for TERK Technologies FDTV1A - TERK - TV Antenna
Summary of Contents for TERK Technologies FDTV1A - TERK - TV Antenna
- Page 1 FDTV1a Owner’s Manual FDTV1a Flat Antenna Amplified Indoor Television Antenna...
- Page 2 About Your TERK FDTV1a Flat Antenna Thank you for choosing the TERK FDTV1a. TERK antennas are designed to deliver sharp, clear reception of digital signals. At TERK, our engineering department is dedicated to designing antennas that enhance both the latest technology and the aesthetics of any viewing environment.
- Page 3 Installing your FDTV1a antenna Find the best location for the Antenna Before you connect the antenna, determine the best spot in your home for optimum reception. Visit www.antennaweb.org to see where your local broadcasts are coming from. Then, try as much as possible to avoid obstructions between these transmitters and your antenna.
-
Page 4: Installation
Installation (continued) Attaching the Multi-Purpose Stand/Wall Mount The Multi-Purpose Stand/Wall Mount attaches to the FDTV1a two ways: to the back for laying flat or mounting to the wall, or to the bottom for standing the antenna upright. To lay the FDTV1a flat or mount it to your wall: 1. - Page 5 Installation (continued) To stand the FDTV1a upright: 1. Push the screws through the holes on the bottom of the stand. 2. Line the stand up with the holes on the bottom of the antenna. Use a Phillips- head screwdriver to attach the stand to the bottom of the antenna.
- Page 6 Installation (continued) To connect the FDTV1a with the amplifier directly to your TV: 1. Make sure your TV is turned off. 2. Connect the FDTV1a’s built-in cable to the input jack of the amplifier. 3. Connect the amplifier’s built- in cable to the antenna input on your TV.
- Page 7 Installation (continued) To connect the FDTV1a without the amplifier directly to your TV: 1. Make sure your TV is turned off. 2. Connect the FDTV1a’s built-in coaxial cable to the antenna input on your TV. 3. Run your TV’s tuner/channel setup to scan for available broadcast channels.
- Page 8 Installation (continued) To connect the FDTV1a with the amplifier to a converter box or other tuning device: 1. Make sure your converter box is turned off. 2. Connect the FDTV1a’s built-in cable to the input jack of the amplifier. 3. Connect the amplifier’s cable to the antenna input on the FDTV1a converter box.
- Page 9 Installation (continued) To connect the FDTV1a without the amplifier to a converter box: 1. Make sure your converter box is turned off. 2. Connect the FDTV1a’s built-in cable to the input jack of the amplifier. 3. Connect the amplifier’s cable to the antenna input on the converter box.
-
Page 10: Troubleshooting
Troubleshooting I have a cable ready TV. Why am I not getting any channels above 13? The tuners inside of cable ready TVs have two modes. One mode is for cable and the other mode is for antenna. When the TV is in cable mode, and you are using an antenna, you will not be able to receive any channels above 13. -
Page 11: 12 Month Limited Warranty
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, NY 11788 CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16, Mississauga, Ontario L5T 3A5... - Page 12 For customer service and For Customer Service Visit Our Website At technical information::1.800.290.6650 www.audiovox.com Product Information, Photos, FDTV1a US IB 02 FAQ’s, Owner’s Manuals...
Need help?
Do you have a question about the FDTV1A - TERK - TV Antenna and is the answer not in the manual?
Questions and answers