Advertisement
Set Local Conditions
allows you to change temperature settings based on current temperature.
'Back' – This option takes you back to the 'Select Activity' screen.
Set Altitude
October 2011
Select the arrow on the keypad for
the option you wish to use. All
settings made on this screen will
remain the same until changed even
if the VectorX is switched OFF.
'Switch to Meters' – This option
changes to Meters or Yards.
'Set Altitude' – This options allows
you to change altitude settings based
on your current location.
'Set Temperature' – This option
Select the arrow on the keypad for
the option you wish to use.
'>5000ft'
'3000ft – 5000ft'
'1000ft – 3000ft'
<1000ft – The VectorX defaults to
this setting.
'Back'
Page 9
© Copyright AccuSport International, Inc.
Advertisement
