Advertisement
Error Messages
Analysis Terminated - This message indicates that the image of the ball has
not been correctly captured. Use the setup template to verify that you are
teeing up the ball correctly and that it is 10-14 inches from the unit.
No Planes – The software is unable to distinguish the black line on the golf ball.
Make sure the line is clear and facing the unit when placed on the tee.
Beyond Hitting Range – The ball is teed up too far away from VectorX. Tee
the ball up within the recommended 10-14 inches (shown on Setup Template)
Ball Clipped Top/Bottom/Right/Left Edge – A portion of the golf ball is cut
off an edge of the image. Use the Setup Template to position the ball correctly
for Drivers, Irons, and Wedges.
October 2011
Page 19
© Copyright AccuSport International, Inc.
Advertisement
