Advertisement
Welcome Screen
Select Activity
'Fitting' – This option allows users to enter information such as 'Name',
'User#', or 'Notes' before beginning the session. This is helpful if saving to a
USB key or to identify club changes, members or customers.
'Run VSeries' – Connects the VectorX to the optional VSeries software modules
if purchased.
October 2011
The Welcome screen appears after
startup. Select the arrow on the
keypad for the option you wish to
choose: (Restore and Language are
not used in normal operation)
'About' – This option gives detailed
information about the VectorX
software and hardware.
'Next' – This option advances you to
the 'Select Activity' screen.
Select the arrow on the keypad for
the option you wish to use:
'Set Conditions' – This option allows
you to 'Switch to Meters', 'Set
Altitude', 'Set Temperature', or go
'Back' to the last screen.
'Practice' – This option navigates to
the 'Data' screen without entering
student or club information. The data
screen is discussed under the fitting
section.
Page 8
© Copyright AccuSport International, Inc.
Advertisement
