Advertisement
Charging the Battery
If you are using a fully charged battery, no AC power source is needed. If the
battery is not charged, or if you will be using the VectorX for an extended time
period, you may use the optional external battery or use the AC adapter to plug
into an electrical outlet.
To charge the battery, plug the VectorX into an outlet via the AC adapter. Make
sure the VectorX unit is turned ON, and allow the unit to charge overnight or for
at least six hours.
Charging the Battery correctly is extremely
Battery warning appears, connect the VectorX Immediately to external power.
Failure to do so may cause significant loss of Battery Life, which can eventually
lead to Battery Failure. If a VectorX is left unattended, and switches off due to a
low battery. session data will be lost.
When the Battery Level is low the Black and Red Warning screens (pictured
above) will display, alternately, on the VectorX LCD screen, and a beeping sound
may be heard from the VectorX. In order to clear this warning the VectorX MUST
be connected to external power.
When using the VectorX on Battery the following indicators will denote the
battery level
Indicates Full Battery
Indicates Low Battery
Indicates that VectorX is plugged into external power
October 2011
Important!!
Indicates Partially Full Battery
Indicates Critically Low Battery
Page 4
© Copyright AccuSport International, Inc.
If the Critically Low
Advertisement
