Lippert Components Solera Installation And Owner's Manual page 5

6. Run the polycord through to the other end of the roll tube
(Fig.9 and Fig.10).
Fig.9
NOTE: Do not unzip the front from the insert. The front
panel fits various size awnings. Once you have set up
the room you can cut off the other polycords and vinyl
on the front insert if you do not want the room to fit other
unit applications.
Fig.10
7. Repeat steps 1 through 6 for the 2
lippertcomponents.com
side panel.
nd
574-537-8900
Solera
®
Screen Room
Installation and Owner's Manual
(For Aftermarket Application)
8. Zip the front panel to the side panels on both sides
(Fig.11).
Fig.11
9. Velcro the top side panel and front panel together on
both sides (Fig.12).
Fig.12
5
Rev: 01.17 - Solera
Family and
Family and Screen Room
®