Locking / Unlocking; Timeout; Setting The Analog Value For Temperature; Setting The Analog Value For Flow Rate - Prosense FMM50-1002 Operating Instructions Manual

10.1.2 Locking / unlocking

The unit can be locked electronically to prevent unintentional settings. On delivery:
not locked.
Locking
Unlocking

10.1.3 Timeout

If no button is pressed for 30 s during parameter setting, the unit returns to the
operating mode with unchanged parameter.

10.2 Setting the analog value for temperature

► Select [ASP1] and set the value at which the minimum value is provided.
► Select [AEP1] and set the value at which the maximum value is pro-
vided.

10.3 Setting the analog value for flow rate

► Select [ASP2] and set the value at which the minimum value is provided.
► Select [AEP2] and set the value at which the maximum value is provided

10.4 User settings (optional)

10.4.1 Determine the standard unit of measurement for flow rate
► Select [Uni.F] and set the unit of measurement::
[Lmin], [m3h], [GPm] or [GPh].
10.4.2 Determine the standard unit of measurement for temperature
► Select [Uni.T] and set the unit of measurement: [°C] or [°F].
► Make sure that the unit is in the normal operating mode.
► Press [Mode/Enter] + [Set] for 10 s.
> [Loc] is displayed.
During operation: > [Loc] is briefly displayed if you try to
change parameter values.
► Press [Mode/Enter] + [Set] for 10 s.
> [uLoc] is displayed.
17