8.2 Explanation of the menu
ASP1
Analog start value for temperature.
AEP1
Analog end value for temperature.
ASP2
Analog start value for flow rate.
AEP2
Analog end value for flow rate.
EF
Extended functions / opening of menu level 2.
HI.F Maximum value memory for flow rate.
LO.F Minimum value memory for flow rate.
HI.T Maximum value memory for temperature.
LO.T Minimum value memory for temperature.
FOU1 Behaviour of output 1 in case of an internal fault.
FOU2 Behaviour of output 2 in case of an internal fault.
dAP Measured value damping / damping constant in seconds.
diS Update rate and orientation of the display.
Standard unit of measurement for flow rate: litres/minute (lmin), cubic me-
Uni.F
tres/hour (m
Uni.T Standard unit of measurement for temperature: °C or °F.
Standard process category of the display: flow rate value or medium tempe-
SELd
rature.
res Restore factory setting.
14
h), gallons per minute (gpm) or gallons per hour (gph).
3