How To Install Your Server Module - Sun Microsystems Blade X6275M2–BB Installation Manual

Server module
Table of Contents

Advertisement

For information about installing chassis components, attaching cables, and powering on the
chassis, refer to the Sun Blade 6000 modular system chassis documentation at:
http://download.oracle.com/docs/cd/E19938-01/index.html
3. Choose a method for connecting to each node's Integrated Lights Out Manager (ILOM)
service processor (SP). These could include the following:
4. Choose a method for connecting to the host console (BIOS and OS). These could include
the following:
Next Steps
"How to Install Your Server Module" on page 23
"Setting Up ILOM" on page 29
"Installing a Supported OS" on page 49

How to Install Your Server Module

Perform all steps and fulfill all requirements in
Before You Begin
For the Sun Blade X6275 M2 with 1GbE (X6275M2–BB), each node has one
Note –
network port: the port for node 0 is assigned to a supported NEM in chassis slot NEM0,
the port for node 1 is assigned to an supported NEM in chassis slot NEM1.
For the Sun Blade X6275 M2 with 10GbE (X6275M2–CB), each node has one network
port: the port for node 0 is assigned to a supported NEM in chassis slot NEM0, the port
for node 1 is assigned to an supported NEM in chassis slot NEM1.
A network connection. You need a PC or workstation connected to the same network as
the SP.
A direct node SP connection using the serial management port of an optional multi-port
cable connected to the node's UCP connector on the server's front panel (refer to the
"Using the Multi-Port Cable" in Sun Blade X6275 M2 Server Module Service Manual
details). You need a PC with terminal emulation software or ASCII terminal
workstation. A terminal server can also be used.
A network connection to the SP so that you can use ILOM to remotely redirect the host
console. You need a PC or workstation connected to the same network as the SP.
A direct host connection through the multi-port cable connector (VGA and USB). Refer
to the
"Using the Multi-Port Cable" in Sun Blade X6275 M2 Server Module Service
Manual
for details.
"Installation Prerequisites" on page
Installation Prerequisites
for
22.
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Blade x6275m2–cb

Table of Contents