Ketra X2 Installation Manual page 14

7. Mount the X2 to the wall box using supplied fasteners. (See Fig 4)
7. Mount the X2 to the wall box using supplied fasteners. (See Fig 4)
8. Secure Wall Plate Mount to the X2 using the supplied fasteners.
8. Secure Wall Plate Mount to the X2 using the supplied fasteners. (See Fig 5)
(See Fig 5)
!
!
4
1 4
3815 S. CAPITAL OF TEXAS HWY
SUITE 100
9. Remove Serial Number Sticker from sheet and affix it to the back of
AUSTIN, TX 78704
P: 512.347.1100
the Wall Plate. (See Fig 6)
9. Remove Serial Number Sticker from sheet and affix it to the back of the Wall Plate. (See Fig 6)
GENERAL NOTES:
10.Attach Wall Plate to Wall Plate mount. It will snap into place.
1. KETRANET MESH IS KETRA'S
10. Attach Wall Plate to Wall Plate mount. It will snap into place. (See Fig 7)
WIRELESS CONTROL PROTOCOL.
(See Fig 7)
2. A NODE IS A KETRANET MESH
ENABLED WIRELESS DEVICE.
3. 50 KETRANET MESH NODES MAX.
PER INSTALLATION NETWORK.
LOAD
4. ALL KETRANET MESH NODES TO
6
BE INSTALLED WITHIN 50'-0"
RANGE OF THE NEAREST NODE.
1 7
X2 KEYPAD,
X2 KEYPAD,
ELV DIMMER
ELV DIMMER
FOR REFERENCE ONLY
NOT FOR
CONSTRUCTION
DRAWING TYPE:
DRAWING #:
11. Energize circuit.
REVISION #:
X2
INSTALLATION GUIDE
X2 INSTALLATION GUIDE DATE: 05/10/2016
Note: Indicator lights will power on if unit is properly wired. DRAWN BY:
CHECKED BY:
SCALE: NTS
Installation is complete.
SHEET NAME
Refer to Design Studio Software for commissioning details.
KETRA
X2 KEYPAD
X2 KEYPAD,
1
X2 KEYPAD,
AC INPUT, NO DIMMER
PAGE 14
I N S TA LL ATI O N
I N S TA LL ATI O N
7. Mount the X2 to the wall box using supplied fasteners. (See Fig 4)
8. Secure Wall Plate Mount to the X2 using the supplied fasteners.
(See Fig 5)
4
3815 S. CAPITAL OF TEXAS HWY
SUITE 100
9. Remove Serial Number Sticker from sheet and affix it to the back of
AUSTIN, TX 78704
P: 512.347.1100
the Wall Plate. (See Fig 6)
GENERAL NOTES:
10.Attach Wall Plate to Wall Plate mount. It will snap into place.
1. KETRANET MESH IS KETRA'S
WIRELESS CONTROL PROTOCOL.
(See Fig 7)
2. A NODE IS A KETRANET MESH
ENABLED WIRELESS DEVICE.
3. 50 KETRANET MESH NODES MAX.
PER INSTALLATION NETWORK.
4. ALL KETRANET MESH NODES TO
6
BE INSTALLED WITHIN 50'-0"
RANGE OF THE NEAREST NODE.
SN LABEL
X2.D.ELV
(430-000029-01/02)
SN: KX12345678
SN LABEL
DC: V0216
(430-000029-01/02)
FOR REFERENCE ONLY
NOT FOR
CONSTRUCTION
WD
DRAWING TYPE: WD
DRAWING #:
00
770-000026-01
REVISION #: 00
X2 INSTALLATION GUIDE
DATE: 05/10/2016
CEH
DRAWN BY: CEH
GEB
CHECKED BY: GEB
SCALE: NTS
SHEET NAME
KETRA
X2 KEYPAD
SHEET
1
SHEET
OF
1 1
OF
I N S TA LL ATI O N
INCANDESCENT DIMMER
(ELV DIMMER)
(ELV DIMMER)
5
5
5
7
7
8
770-000026-01
770-000026-01 r08
X2.D.ELV
SN: KX12345678
DC: V0216
PAGE 15
PAGE 15
X2
INSTALLATION GUIDE